Sibir-optics V 170 GE Manuel d'utilisateur télécharger pdf (Page 6)

The gas installation and servicing should only be carried

out by an authorized, qualified person and must conform

to all relevant national and local regulations.

The gas supply system must incorporate a pressure

regulator to maintain a supply pressure of not more than

30 mbar.

A wall-mounted or floor-mounted shutoff valve of an

approved bottled-gas type must be incorporated in the

supply line in a position which is readily accessible to the

user.

If a hose connection is used, only tubing of the approved

type must be used. The length of the tube shall not

exceed 1,5 m.

The gas inlet tube should be connected at the rear to the

connection provided and be well secured with hose

clamps.

All completed connections should be checked for leaks

with soapy water.

DO NOT use a flame to check for gas leaks.

ELECTRICAL CONNECTION

The electrical installation must be carried out in a proper

and durable manner, taking into accounts all relevant

regulations and codes of practice.

For mains voltage operation, it is important that the

circuit is effectively earthed.

Mains Connection.

Check that the voltage stated on the data plate is the

same as the mains voltage in use.

Plug the refrigerator power cord into an easily accessible

earthed wall socket.

Electrical leads must be routed and secured so

that they cannot come into contact with hot or

sharp parts of the refrigerator.

From the side

At least 25 mm

From

above

Wall

Rear

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Pas de commentaire

Sibir-optics V 170 GE Manuel d'utilisateur Page 6